Workshop #6
20th April 2019
The main topic for this workshop was fibreglassing the hull. Some final words were spoken regarding aligning the propeller shaft tubes, and ensuring the slot for them was correct.
Final filling, sanding and application of a coat of epoxy had been completed. Steve talked about using Z-Poxy finishing resin and measuring and mixing. A light fibreglass cloth, approx 1/2 oz, was applied and epoxied, firstly over the parallel section of the hull, with some trimming over the bow area. A separate piece was applied to the transom.
The pictures show the sequence.
Information and pictures by Paul.
